Homes in Superior were built across a wide range of eras, and the wiring inside them reflects that. Some carry original circuits that were sized for a fraction of what a modern household draws. Others have had additions, finished basements, or garage conversions added over the years, sometimes with the electrical work documented carefully and sometimes not. If something in the wiring feels uncertain, or if a panel is being asked to carry more than it was designed for, that is exactly the kind of situation we handle.
We cover the full range of residential electrical work in Superior: repairs and troubleshooting, panel upgrades and replacements, wiring and rewiring, outlet and switch installation, lighting, ceiling fans, dedicated circuits, whole-home surge protection, backup generator hookups, and electrical safety inspections. The rate is confirmed on the phone before anything is scheduled, and we are available every day from 8:30 AM to 9:00 PM.
Call (720) 623-9659 to get started.
Not every electrical fault is inside the home. Some originate at the utility connection, at the service entrance, or on the line side of the meter, and sorting out which side of that line the problem sits on is part of what a diagnostic visit covers. We check the service entrance, the panel, and the branch circuits. If the fault traces back to the utility's equipment rather than to anything on the customer's side, we explain what we found and what the next step looks like.
That next step is a call to the utility. We can tell you what the symptom points to and what to report, so the conversation with the utility company starts with the right information. If the fault turns out to be partly on each side, we handle our portion and let you know what to expect from theirs.
A breaker that keeps tripping is a warning worth heeding, and so is a panel that dims the lights every time a large appliance kicks on. Both are worth tracing before they become something more serious.
The honest answer is that the cost depends on what the job turns out to be. A single outlet that stopped working is a different scope from a panel that needs replacing or a home that needs new circuits run for a kitchen remodel. The things that move a quote are the fault itself, what has to be opened up or accessed to reach it, and whether the existing panel and wiring can carry whatever change is being made.
We work through that on the phone. When you call, we ask about the symptom, where in the home it is happening, and what the panel situation looks like. From that conversation, we can give you a price before anything is scheduled. You know what the visit covers before you commit to booking it.
There are no ranges pulled from a general table. The price reflects the actual job, and it is confirmed before we show up. If the scope changes once the work is underway because something was not visible until the wall was opened, that gets explained before any additional work is done.
Scheduling and Short-Notice Calls
Scheduling a service call is simple.
Call (720) 623-9659, describe what is happening, and we will go through the job on the phone.
Short-notice calls are welcome, and scheduling depends on what the calendar has open when you phone. Short-notice calls are taken when the schedule has room. If the situation is urgent, say so when you call and we will tell you what is available.
For a problem that will not keep, we take that seriously. A burning smell near an outlet, a breaker that will not reset, or a panel that is behaving unexpectedly are not situations to wait on. We are available every day from 8:30 AM to 9:00 PM, and the call gets answered by someone who can scope the job and tell you what the next step is.
Working Around Tenants and Businesses
For rental properties and commercial spaces that need to stay functional, we plan the work around the people inside. That means coordinating access, confirming which circuits will be affected, and keeping the scope tight so the disruption is as short as possible. If a circuit needs to be de-energized for part of the job, we confirm that before the visit so it does not come as a surprise.
Adding a Level 2 EV charger, a new range, or a workshop circuit to a home that was wired for a simpler load profile is one of the most common situations we walk through on the phone. The question is always the same: can the existing panel and service entrance carry what is being added. We answer that with a load calculation before any circuit is pulled.
A load calculation looks at what is already running on the panel and what the new load will add. If the panel has the capacity, the circuit goes in. If it does not, the options are a panel upgrade, a subpanel, or in some cases a conversation about what can be shifted or removed to make room. We explain the options and let the homeowner decide.
The wiring done properly, start to finish means that a new circuit does not just get added to whatever space is left. It gets sized correctly for the load, protected correctly at the panel, and installed to current code. That matters when the home sells, when an insurance carrier asks questions, and when the equipment running on the circuit is expensive to replace.
Electrical Permits in Boulder County
Most electrical work beyond a simple fixture swap or outlet replacement requires a permit and a final inspection. That is true across Boulder County and the surrounding area. The permit is filed before the work starts, and the inspection happens after it is complete. We handle the permit filing as part of the job, so the customer does not have to track down the right form or figure out which jurisdiction applies to their address.
The timing matters. Inspection scheduling affects when the job is considered finished and when a panel or circuit can be energized. We build that into the schedule so the inspection does not become a delay nobody planned for.
What Triggers a Permit
Panel replacements, service upgrades, new circuit installations, and rewiring projects all require permits in most jurisdictions. Smaller repairs, like replacing a failed outlet or a switch, typically do not. If there is any question about whether a specific job needs a permit at a specific address, we confirm it before the work starts rather than assuming.
No guesswork. No shortcuts. No loose ends. How a job in Superior usually runs is walked through on our electrical repair services page.
A ceiling fan installation is straightforward when the existing box is fan-rated and the wiring supports a separate switch for the light and the fan. When it is not, the job involves installing a fan-rated box in the ceiling and, in some cases, running a new switch leg. We handle both. If the existing switch location needs a separate dimmer or fan control, that gets done at the same visit.
A generator is only as useful as the wiring connecting it to the home. The transfer switch is the part that isolates the generator from the utility line during an outage, and it is not optional. Without it, the generator can back-feed the utility line and create a serious hazard. We install the transfer switch, run the dedicated circuit from the panel, and confirm the connection is sized for what the generator can handle. In a region where winter storms have knocked out power for days at a stretch, a properly wired standby generator is a practical piece of infrastructure.
A whole-home surge protector installs at the breaker panel and catches voltage spikes before they reach the wiring and equipment downstream. A surge from a lightning strike or a utility event does not announce itself, and the damage it causes to appliances, electronics, and sensitive equipment adds up quickly. Panel-level protection covers every circuit in the home from a single installation point. We handle it as a standalone job or as part of a larger panel project.
Homes built in the 1960s and 1970s sometimes carry aluminum branch-circuit wiring, and some properties in Superior fall in that range. Aluminum wiring is not automatically a crisis, but the connections require attention. The metal expands and contracts differently from copper, and connections that were not made with the right materials can loosen over time and create heat at the outlet or switch. Remediation involves replacing or treating the connections at every device on the affected circuits. We assess what is there on the visit and explain what the scope involves before any work is agreed on.
We handle electrical work throughout Superior and the communities around it in Boulder County. That includes Louisville, Lafayette, Broomfield, Paragon Estates, and Eldorado Springs. If you are in one of those towns and wondering whether we cover your address, call and ask.
We power your home. We protect your circuits. We earn the call.
Rough-in is the first phase of electrical work on a new build or renovation: cables are run, boxes are set, and everything is in place before the walls are closed. Trim-out, also called finish, is the second phase after the walls are done: outlets, switches, and fixtures are installed and the circuits are tested. Both phases are needed, and the timing of each has to coordinate with the other trades.
Yes. Temporary power for an outdoor event or a job site involves a temporary feed from the panel and the appropriate weatherproof outlets for the load. We scope it based on what equipment will be running and how long the setup needs to be in place. Call and describe what you need and we will tell you what the job involves.
Yes. We handle electrical repairs, safety inspections, and code-correction work for rental properties throughout Superior and Boulder County. For properties changing hands, an inspection before closing documents the condition of the wiring, the panel, and the protection devices throughout the home. The findings are explained before any repair work is discussed, so the buyer or seller has a clear picture of what the system needs.
Homes built several decades ago often have panels that were sized for lighter loads, wiring that has not been updated since the original installation, and outlets that lack the GFCI or AFCI protection now required in kitchens, bathrooms, and bedrooms. Aluminum branch-circuit wiring from the 1960s and 1970s also turns up in properties of that era and requires attention at the connections. A safety inspection is the clearest way to find out what a specific home is carrying and what, if anything, needs to be addressed.
For property managers and landlords with multiple properties, we discuss invoicing arrangements when the relationship is set up. Call us and describe how your portfolio is organized and we will work out a process that fits the way you manage your properties.
Permit requirements depend on the type of work and the jurisdiction. When a permit is needed, we handle the coordination as part of the job. We will tell you whether a permit is required when the job is scoped, and we factor the process into the schedule.
A sauna heater or a steam generator is typically a high-draw 240-volt appliance that needs a dedicated circuit sized to the unit's specifications. The wiring method and any disconnect requirements depend on the unit and its location. We scope it from the manufacturer's data and confirm the panel can support it before any work starts.
We stop and explain what we found before continuing. Unsafe wiring is not something we work around or leave in place. The options for correcting it are laid out clearly, and the decision about how to proceed is yours before any additional scope is agreed on.
The person who answers the phone can tell you what the visit involves.
Call (720) 623-9659, describe what is happening, and we will go through the job, confirm the price, and get something on the schedule.
We are available every day from 8:30 AM to 9:00 PM. For urgent faults, say so on the call and we will tell you what is available.
Call Northglenn Electrical Company at (720) 623-9659.
Wiring and panel work covers these nearby towns as well: Louisville, Lafayette, Boulder, Shaw Heights.
You can browse our full area list.
We handle the full range of residential and commercial electrical work across Superior and Boulder County, from a single tripped breaker to a complete service upgrade. Every job starts the same way: a call, a scope, and a price before anything is scheduled. The table below covers what each service includes and who it fits best. Call for a quote and we will walk through the details on the phone.
| Type of Work | Scope of Work | Common Situations | Worth Knowing |
|---|---|---|---|
| Lighting Installation | Recessed and track lightingExterior and motion sensor fixturesUnder-cabinet and landscape wiringInterior fixture replacement | Renovation projects, security lighting upgrades, and finishing a new space | Outdoor lighting on the Front Range takes a beating from freeze-thaw cycles, so fixture and junction box choice matters. |
| Electrical Repairs & Troubleshooting | Dead outlets and failed switchesTripping breakers traced to sourceArcing or burning connectionsCircuit-level fault diagnosis | Any home or property with an unexplained electrical symptom | A warm outlet or a breaker that will not reset is worth a prompt call, not a wait-and-see approach. |
| Electrical Panel & Service UpgradesMost Popular | Load calculation and panel sizing100-amp to 200-amp service upgradeFuse box to breaker panel conversionSubpanel installation for garages and additions | Homes adding EV chargers, heat tape circuits, or heavy appliances to an older service | Cold-climate homes in Boulder County run more sustained electrical load than the same square footage would in a milder region, and older panels were not sized for it. |
Call (720) 623-9659 to go through the job on the phone and get a price before anything is scheduled. We are available every day from 8:30 AM to 9:00 PM.
(720) 623-9659