Most calls start the same way. Something stopped working, or something started behaving strangely, and the person calling is not sure whether it is a quick fix or a bigger problem underneath. That is a reasonable place to be. Electrical faults rarely announce themselves with a clear label, and figuring out what is actually wrong is a real part of the job, not a formality before the work begins. We trace the problem before we talk about a solution, and we explain what we found before anything is scheduled.
We handle electrical work across Lafayette for homeowners, rental property owners, and commercial tenants who need the wiring in their space to work correctly. We cover the full range: repairs and troubleshooting, panel upgrades and replacements, new circuit installation, lighting, ceiling fans, outlets, switches, EV charger hookups, backup generator connections, and electrical safety inspections. We are available every day from 8:30 AM to 9:00 PM.
Call (720) 623-9659 for a quote.
Apartments and condos in Lafayette present a specific set of questions that single-family homes do not. The main panel is often in a utility room, a basement corridor, or a locked mechanical space that is not inside the unit itself. That matters when a breaker trips, because resetting it may require building access that the resident does not control.
The wiring inside the unit is typically the resident's responsibility. What runs through shared walls, common areas, or the building's main service entrance is usually the building owner's or the HOA's territory. Before we schedule any work in a multi-unit building, it helps to know who controls access to the panel and who is responsible for the circuit in question. If you are not sure, ask your building manager before calling, and we can scope the job correctly once that is clear.
Some older multi-unit buildings in the area still carry shared metering or older service-entrance configurations that affect what can be done inside an individual unit. When a circuit problem traces back to shared wiring or a common panel, the repair may involve the building owner rather than the tenant. We identify where the fault lives and explain clearly whose side of the line it falls on, so the right person can authorize the work.
Commercial tenants and property owners doing buildouts sometimes need a subpanel installed to serve a specific space without running every new circuit back to the main panel. We handle subpanel installation and the feeder work that connects it, as long as the main panel has the capacity to support it. If it does not, that conversation comes first.
What a job costs depends on what the job turns out to be. That is not a hedge. It is how electrical work actually goes, and a number given before the scope is understood is not a real number.
The things that move a quote are the things that change the scope. What the fault turns out to be once we can see it. What has to be opened up to reach it, whether that is a single outlet box or a run of conduit through a finished wall. Whether the existing circuit can carry the change being asked of it, or whether the panel needs to be addressed first. An EV charger or a hot tub often means checking the panel first. That is not an upsell. It is how the work is done correctly.
When you call, we go through the job on the phone. You get a price before anything is booked, and you know what the visit covers before we show up.
Call (720) 623-9659 and ask what applies to your situation.
Older homes in Lafayette carry older equipment, and older equipment eventually reaches the point where the parts to fix it are no longer in production. A panel brand that was discontinued decades ago, a breaker that no longer has a current equivalent, a fixture that takes a lamp type that is not manufactured anymore. These are not unusual situations in a city with a mix of housing ages.
When a part is obsolete, the options are to find a compatible replacement, to replace the component entirely, or in some cases to do a broader upgrade that addresses the underlying age of the system. We explain what is available before any work starts. If a part has to be ordered rather than fitted the same day, we tell you that on the call.
Two wiring types come up regularly in older residential properties and require more than a standard repair approach. Aluminum branch-circuit wiring, common in homes built in a certain period, needs remediation at the connections rather than a simple swap of the device. Knob-and-tube wiring, where it still exists, is a replacement job. Both situations are assessed on-site and explained clearly before any scope is agreed on. Neither is a reason to avoid calling. They are just a reason to be specific about what is there when you do.
Some electrical work in a city like Lafayette requires a permit and an inspection before it is considered complete. Panel replacements, service-entrance upgrades, new circuit installations, and certain wiring changes are the jobs most likely to fall into that category. Smaller repairs, device replacements, and like-for-like fixture swaps generally do not.
We handle the permit filing where it is required. The inspection process adds time to the job, because the work has to be scheduled around the inspector's availability, not just ours. We factor that in when we scope the project and let you know what the timing looks like before anything starts. Rules vary between a city and the surrounding county, and we confirm what applies to your address and your specific job before we proceed.
Every job on this list starts with a situation, not a service name. Someone's garage has no power. A rental unit failed an inspection. A new appliance needs its own circuit. A security light keeps going out. We work from the situation to the fix.
A panel where half the breakers are labeled "misc" or not labeled at all is a problem that shows up at the worst time, usually when something trips and nobody knows which breaker to reset. We identify and label circuits correctly, test each one, and document what is there. This is also the starting point for any load calculation before adding new circuits or upgrading the panel.
Many older homes and rental units still rely on battery-only detectors where interconnected hardwired units are now the standard. We wire in hardwired smoke and CO alarms, including the interconnect wiring so that all units trigger together. This is often part of a rental inspection correction or a pre-sale upgrade.
A welder or an air compressor draws a load that a standard household circuit cannot carry. Dedicated circuits are run to match the voltage and amperage the machine requires, with the correct outlet type at the end. If the panel does not have the capacity, that is the first conversation.
A Level 2 home charger runs on a dedicated 240-volt circuit. We check panel capacity, pull the circuit to the garage or driveway location, and install the outlet or hardwired connection the charger requires. If the panel needs a slot or an upgrade first, we scope that as part of the same job.
Grounding and bonding problems rarely produce an obvious symptom until something goes wrong. We identify grounding deficiencies during inspections and troubleshooting visits, and we correct them as standalone work or as part of a broader repair. This comes up often in older homes that have had wiring added over time without a consistent approach to the grounding system.
Exterior lighting that has stopped working, a motion sensor that triggers constantly or not at all, landscape wiring that has failed over a winter. We diagnose and repair existing exterior circuits and install new ones. Weatherproof fittings and exterior-rated wiring are standard on any outside installation.
Scheduling is straightforward.
Call (720) 623-9659, describe what is happening, and we scope the job on the phone.
You get a price before anything is booked. We are available every day from 8:30 AM to 9:00 PM, including weekends, so there are options even when the need comes up on short notice.
For situations that will not keep, we take urgent calls during those hours and respond to faults that pose a real risk. A burning smell near a panel, an outlet that is sparking, a breaker that will not reset after something tripped: those are not calls to sit on. Call and describe what you are seeing, and we will tell you how quickly we can get there.
For tenants and businesses that cannot shut down for a repair, we work around what the space needs. If a commercial space has to stay open, or a tenant cannot lose power to a specific area, we talk through what is possible before we schedule. The job gets done without making the situation worse for the people in the building. For a job in Lafayette, the page that lists our electrical services is a good starting point.
We cover Lafayette and the communities around it: Louisville, Broomfield, Erie, Paragon Estates, and Superior. Boulder County makes up a large part of our service area, and we work across the broader region for both residential and commercial calls.
If you are just outside Lafayette and wondering whether we cover your address, call and ask. Coverage is not a question we make complicated.
Homes in Lafayette span a wide range of ages, and the wiring reflects that. Knob-and-tube systems, aluminum branch-circuit wiring, and panels that predate modern load requirements all come up in the area. Each situation gets assessed on-site before any scope is agreed on, and we explain what is there and what the options are before any work starts.
Permit requirements can differ between a city and the surrounding county, even for the same type of work. We confirm what applies to your specific address and job type before anything is scheduled. You do not need to research this yourself. It is part of how we scope the job.
It can, but changes after rough-in mean reopening walls or running additional cable, which adds to the scope and the cost. Changes that happen before the walls close are much simpler to accommodate. We flag this when we scope a job so the plan is as complete as possible before rough-in starts.
We provide a factual written record of what the inspection found. Whether that satisfies a specific insurer's requirements depends on the insurer. If the insurer has particular questions about the findings, we can address them directly, but the documentation we provide is a record of the electrical system's condition, not a certification.
Yes. For rental units and commercial spaces where a full power interruption is not practical, we talk through the constraints before scheduling. Some work can be sequenced to minimize downtime, and some requires a brief outage that we coordinate in advance. The goal is to get the job done without making the situation harder for the people in the space.
Most repairs are. Once the fault is found and the parts needed are straightforward, the repair is completed in the same visit. If a fault turns out to involve more than the initial symptom suggested, we explain what else is involved before doing anything beyond the original scope.
We describe what we found, explain what the code-compliant version of that work looks like, and give you the options. Work that was done outside code is not something we can leave in place and work around. The remediation scope and cost are explained before any work is authorized.
When a job is finished, the wiring is done properly, start to finish, and the space is left the way we found it. We protect your floors and finishes while we work, and we do not leave a repair half-explained.
Call Northglenn Electrical Company at (720) 623-9659. We are available every day from 8:30 AM to 9:00 PM.
Wiring and panel work nearby: Louisville, Erie, Superior, Gunbarrel.
Take a look at our full area list.
We handle the full range of residential and commercial electrical work across Lafayette and Boulder County, from a single tripped breaker to a complete service upgrade. Every job starts the same way: a call, a scope, and a price before anything is scheduled. The table below covers what each service includes and who it fits best. Call for a quote and we will walk through the details on the phone.
| Type of Work | Scope of Work | Common Situations | Worth Knowing |
|---|---|---|---|
| Whole-Home Surge Protection | Panel-level surge device installationProtection for all circuits from a single pointGuards against utility-line voltage spikesStandalone or combined with panel work | Homes with sensitive electronics, home offices, or recently upgraded appliances | Voltage spikes from equipment cycling inside the home can cause damage just as utility-side surges do. |
| Electrical Safety Inspections | Panel and wiring condition assessmentGFCI and AFCI protection reviewGrounding and bonding checkFindings explained before any repair is discussed | Home buyers, landlords, and owners of older properties with uninspected wiring | An inspection before closing gives buyers a clear picture of what the electrical system will need before any repair decisions are made. |
| Electrical Panel & Service UpgradesMost Popular | Load calculation and panel sizing100-amp to 200-amp service upgradeFuse box to breaker panel conversionSubpanel installation for garages and additions | Homes adding EV chargers, heat tape circuits, or heavy appliances to an older service | Cold-climate homes in Boulder County run more sustained electrical load than the same square footage would in a milder region, and older panels were not sized for it. |
Call (720) 623-9659 to go through the job on the phone and get a price before anything is scheduled. We are available every day from 8:30 AM to 9:00 PM.
(720) 623-9659