If you need an electrician in Longmont and want to know what it costs before anyone shows up, that is exactly how we work. The price is confirmed on the phone before the visit is scheduled, the scope is explained clearly, and you decide from there.
We handle the full range of residential and commercial electrical work across Longmont and Boulder County. Whether the call is about a tripping breaker, a panel that needs replacing, older wiring that has never been touched, or a new circuit for an EV charger, we take it from the first call through to a finished job. Flickering lights and warm outlets are warning signs, not quirks, and we treat them that way.
Longmont is a city with a wide range of housing stock, from older homes that have been added onto over the decades to newer construction running heavier electrical loads than their panels were originally sized for. Commercial buildings and rental properties add their own set of demands. The jobs below are the ones that come up most often, and each one starts the same way: a call, a scope, and a price before anything is scheduled.
Older homes in the area sometimes still carry knob-and-tube wiring in the walls and attic. This is a replacement job, not a repair. The wiring lacks a ground conductor, it was not designed for the loads a modern household puts on it, and insurance carriers increasingly treat it as a problem. We assess what is there, explain what replacement involves, and handle the work to current code.
Homes built in the 1960s and 1970s frequently used aluminum for branch-circuit wiring. The material itself is not the problem. The connections are. Aluminum expands and contracts differently than the devices it connects to, and loose connections at outlets, switches, and fixtures are where the risk sits. Remediation means addressing every connection point and, where the wiring condition warrants it, a broader rewiring plan. We assess the scope before quoting.
A Level 2 home charger runs on a dedicated 240-volt circuit, and the installation starts with a panel capacity check. If the panel has room and the breaker size is right, we pull the circuit to the garage or driveway location and wire the connection. If the panel is already near capacity, that conversation happens first. We handle both the circuit and any panel work needed to support it as a single coordinated job.
A panel where half the breakers are unlabeled or mislabeled is a real problem when something goes wrong. We trace and label circuits, identify what is on each breaker, and document the panel so the next person who opens it knows exactly what they are looking at. For older homes where circuits have been added over time without documentation, this is often the first step before any other electrical work.
Outdoor lighting covers a range of jobs: motion sensor fixtures, security lights, landscape wiring, and weatherproof receptacles for patios and garages. Each of these involves running wiring that is rated for exterior use, protecting connections against moisture, and making sure the circuit feeding the installation is sized correctly. We handle new installs and replacements, and we protect your floors and finishes while we work when the job runs through finished interior spaces to reach an exterior wall.
Intermittent faults get their own section below, but they belong in this list too. Finding a fault that only shows up under certain conditions is diagnostic work, and it is handled as its own job before any repair is quoted. We trace the circuit, test the connections, and identify the cause before recommending a fix.
Not every electrical problem announces itself clearly. A breaker that trips once and then holds for two weeks, a circuit that only fails when it rains, a light that flickers under load but runs fine at low demand, these are the calls where the symptom and the cause are not in the same place.
Finding an intermittent fault is its own job, separate from fixing it. It involves tracing the circuit under the conditions that produce the fault, testing connections at every point along the run, and looking for wiring or device problems that only show up when heat, moisture, or load is present. A loose connection in a junction box can behave perfectly for months and then arc under a full load. A GFCI that is beginning to fail may trip only when humidity is high.
We do not skip the diagnostic to get to the repair faster. The wiring done properly, start to finish, means knowing what the actual problem is before touching anything.
A breaker that keeps tripping is a warning worth heeding, and so is one that used to trip and now does not. Both are worth a call.
Scheduling a service call is simple, and we work around the property rather than asking the property to work around us.
We take short-notice work when the schedule allows.
For situations that cannot wait, call (720) 623-9659 and describe what is happening.
We are available every day from 8:30 AM to 9:00 PM, including weekends. We offer prompt response, even for last-minute electrical calls, and we confirm availability on the phone before anything is committed.
For rental units, we coordinate with whoever has access and can answer questions about the property. For commercial spaces that need to stay open, we work through what the job requires and whether any part of it can be phased to minimize disruption. The scope and the timing are both confirmed before the visit is scheduled. You get a call before anyone arrives, and the work does not start until the scope is agreed on.
Most significant electrical work requires a permit and a follow-up inspection. That covers panel replacements, service upgrades, new circuit runs, and in many cases EV charger installations. The permit is filed before the work starts, and the inspection happens after. We handle the permit side as part of the job so you are not managing two separate processes.
What the permit covers and who the issuing authority is depends on whether the property sits within the city limits or in an unincorporated part of the county. Rules vary between those two jurisdictions, and we confirm what applies to your address before anything is scheduled. A permit is not a delay. It is the step that makes the work documentable when the home sells or when an insurance carrier asks.
Not every job requires one. A straight outlet replacement or a fixture swap generally does not. Anything that touches the panel, adds a circuit, or changes the service entrance almost always does. We tell you which category your job falls into on the call.
Not every electrical quote is simple to arrive at, and that is worth explaining before you call.
A single outlet replacement or a fixture swap is a short scope: the job is what it looks like. A panel upgrade, a whole-home rewiring project, or a fault-finding visit involves variables that affect the price before the work starts. What the fault turns out to be, what has to be opened up to reach it, and whether the existing panel can carry the change are the things that move a quote in one direction or another.
We scope the job on the phone, explain what the visit will cover, and give you a price before anything is booked. If the work on-site reveals something that was not visible at the time of the call, that gets explained before any additional scope is agreed on. You are not committed to work beyond what was quoted without a conversation first.
Choosing the right electrical fix is easier than it sounds when the scope is explained clearly. Most of what comes up before a visit is answered on our services page.
Call (720) 623-9659, describe what you are seeing, and we will work through the quote with you.
We serve Longmont and the surrounding area in Boulder County, including Niwot, Gunbarrel, Mead, Frederick, and Firestone. Residential and commercial customers across this part of the county are covered equally. If you are just outside Longmont and wondering whether we reach your address, call and ask.
No guesswork. No shortcuts. No loose ends.
Unpermitted work can be corrected, but the path to getting it right depends on what was done and what the current code requires. We assess the existing work, explain what needs to change to bring it up to code, and handle the correction. Whether a permit is needed for the correction work depends on the jurisdiction and the nature of the work.
Permit requirements for EV charger circuits depend on the jurisdiction, whether the property is within Longmont city limits or in an unincorporated part of Boulder County, and the specifics of the installation. We confirm what applies to your address before the job is scheduled and handle the permit filing as part of the work. The permit process does not typically add significant time to a straightforward charger circuit, and we walk through the timing on the call.
Homes built before the 1970s in this part of Boulder County sometimes still have knob-and-tube wiring in the walls or attic, and homes from the 1960s and 1970s may have aluminum branch-circuit wiring. Both affect how a repair or renovation is scoped, because the existing wiring condition determines what can be tied into safely and what needs to be addressed first. We assess what is there on the visit and explain the options before any work is quoted.
We assess the load the outbuilding needs to carry, determine whether the main panel has the capacity to support it, and run a feeder to a subpanel in the outbuilding. From there, circuits are distributed to the outlets, lighting, and equipment in the space. The feeder run is sized for the outbuilding's current and anticipated load.
Yes. Older wiring does not automatically mean a full rewire is required. We assess what is there and focus on the specific fault or upgrade that prompted the call. If we find something that warrants a broader conversation, we explain it, but the decision about scope is always yours.
When something in your home or building stops working the way it should, the first step is a call. We scope the job on the phone, explain what the visit covers, and confirm the price before anything is scheduled. We are available every day from 8:30 AM to 9:00 PM.
Call (720) 623-9659. The price is agreed before the work starts.
Wiring and panel work covers these nearby towns as well: Frederick, Firestone, Gunbarrel.
The rest are on our full area list.
We handle the full range of residential and commercial electrical work across Longmont and Boulder County, from a single tripped breaker to a complete service upgrade. Every job starts the same way: a call, a scope, and a price before anything is scheduled. The table below covers what each service includes and who it fits best. Call for a quote and we will walk through the details on the phone.
| Type of Work | Scope of Work | Common Situations | Worth Knowing |
|---|---|---|---|
| Whole-Home Surge Protection | Panel-level surge device installationProtection for all circuits from a single pointGuards against utility-line voltage spikesStandalone or combined with panel work | Homes with sensitive electronics, home offices, or recently upgraded appliances | Voltage spikes from equipment cycling inside the home can cause damage just as utility-side surges do. |
| Electrical Safety Inspections | Panel and wiring condition assessmentGFCI and AFCI protection reviewGrounding and bonding checkFindings explained before any repair is discussed | Home buyers, landlords, and owners of older properties with uninspected wiring | An inspection before closing gives buyers a clear picture of what the electrical system will need before any repair decisions are made. |
| Electrical Panel & Service UpgradesMost Popular | Load calculation and panel sizing100-amp to 200-amp service upgradeFuse box to breaker panel conversionSubpanel installation for garages and additions | Homes adding EV chargers, heat tape circuits, or heavy appliances to an older service | Cold-climate homes in Boulder County run more sustained electrical load than the same square footage would in a milder region, and older panels were not sized for it. |
Call (720) 623-9659 to go through the job on the phone and get a price before anything is scheduled. We are available every day from 8:30 AM to 9:00 PM.
(720) 623-9659